Nexgrill Pellet Smoker Covers.
Sized to Fit Your Oakford.

Each Nexgrill cover is sized for a specific Oakford model. The Oakford 715 cover fits the 715 only. The 790/875 Pro cover fits either the 790 or the 875 Pro. The 1000/1125 Pro cover fits either the 1000 or the 1125 Pro flagship.

If you are not sure which Oakford model you have, look on the front-facing badge of the smoker or the model number on the bottom of the hopper. If still unsure, send us a photo and we will confirm before you order.

Yes. Nexgrill Oakford covers use a UV-resistant, water-resistant polyester fabric with sealed seams. The covers handle Sydney summers (direct sun and 40-degree days), winter rain, and the southerly busters without degrading.

Permanent outdoor storage under cover is fine for years. If your smoker is in direct sun all day or fully exposed to coastal salt spray, the cover will eventually show wear over a longer timeframe, but the smoker beneath stays protected.

Yes, but wait until the smoker is fully cool before covering. The cooker can hold heat for several hours after a cook, and covering it while still warm can melt or damage the cover and trap moisture inside.

Once cool, the cover stays on permanently between cooks. The integrated venting in the cover prevents condensation buildup, so you do not need to remove the cover to air out the smoker.

A universal cover sized close to your Oakford footprint will fit, but loosely. The Nexgrill cover is dimensioned exactly to the Oakford it pairs with, which means a snug fit, no fabric flapping in wind, and no excessive material bunching at the base.

Genuine Nexgrill covers also have the right strap placement, vent positioning, and reinforcement points for the Oakford specifically. A generic cover may protect but it does not fit the way the smoker was designed to be covered.

Nexgrill covers are backed by the manufacturer warranty for material defects and workmanship faults. Normal wear and tear from outdoor exposure over several years is not covered, but premature failure of stitching, fabric, or fittings is.

Covers bought from BBQ Republic come with our authorised dealer support, which means we handle the warranty claim directly if anything fails. Aftermarket covers sold by non-authorised retailers do not carry this protection.

Yes. Order a Nexgrill cover at the same time as your Oakford smoker and we will deliver and fit the cover as part of the standard install. The cover is fitted to the cool smoker once we have it positioned in your nominated spot.

If you are buying the smoker now and the cover later, just add the matching cover to your next order. Covers ship via standard delivery and are quick to fit yourself once the smoker is in place.